Filter
Top Products
When it is displayed, be sure to read the Software License Terms
carefully.
Turning off the power
The power can be turned off in one of three modes, either Shut Down
Mode, Hibernation Mode or Sleep Mode.
Shut Down Mode
When you turn off the power in Shut Down Mode, no data will be saved
and the tablet will boot to the operating system's main screen the next time
it is turned on.
1. If you have entered data, either save it to the Solid State Drive or to
other storage media.
Never turn off the power while a disk (disc) is being accessed,
otherwise you may lose data or damage the disk.
Never turn off the power while an application is running. Doing so
could cause loss of data.
Never turn off the power, disconnect an external storage device or
remove storage media during data read/write. Doing so can cause
data loss.
2. Click Start.
3.
Click the Shut down button ( ).
4. Turn off any peripheral devices connected to your tablet.
Do not turn the tablet or peripheral devices back on immediately - wait a
short period to avoid any potential damage.
Sleep Mode
If you have to interrupt your work, you are able to turn off the power without
exiting from your software by placing the tablet into Sleep Mode. In this
mode data is maintained in the tablet's main memory so that when you turn
on the power again, you can continue working right where you left off.
When you have to turn off your tablet aboard an aircraft or in places where
electronic devices are regulated or controlled, always completely shut
down the tablet. This includes turning off any wireless communication
functionalities, and cancelling settings that reactivate the tablet
automatically, such as a timer recording function. Failure to completely shut
down the tablet in this way could allow the operating system to reactivate
and run pre-programmed tasks or preserve unsaved data, which could
interfere with aviation or other systems, possibly causing serious injury.
PORTÉGÉ M930
User's Manual 1-7