Filter
Top Products
2.
Point to the arrow icon ( ) and then select Hibernate from
the menu.
Automatic Hibernation Mode
The tablet can be configured to enter Hibernation Mode automatically when
you slide the power switch. In order to define these settings, you can follow
the steps as described below:
1. Click Start and click the Control Panel.
2. Click System and Security and click Power Options.
3. Click Choose what the power button does.
4. Enable the desired Hibernation Mode settings for When I press the
power button.
5. Click the Save changes button.
Data save in Hibernation Mode
When you turn off the power in Hibernation Mode, the tablet will take a
moment to save the current data in memory to the Solid State Drive.
After you turn off the tablet, and the content of memory has been saved to
the Solid State Drive, turn off the power to any peripheral devices.
Do not turn the tablet or devices back on immediately. Wait a moment to let
all capacitors fully discharge.
Restarting the tablet
Certain conditions require that you reset the tablet, for example if:
You change certain system settings.
An error occurs and the tablet does not respond to your keyboard
commands.
If you need to restart the tablet, there are three ways this can be achieved:
Click Start, point to the arrow icon ( ) and then select
Restart from the menu.
Press CTRL, ALT and DEL simultaneously (once) to display the menu
window, then select Restart from the Shut down options.
Slide the SAS switch to display the menu window and then select
Restart from the Shut down options.
Slide and hold the power switch for approximately five seconds. Once
the tablet has turned itself off, wait between ten and fifteen seconds
before turning the power on again by sliding the power switch.
PORTÉGÉ M930
User's Manual 1-10