Filter
Top Products
Chapter 11
Setup and Password Security
This chapter explains how to use TSETUP and MaxTime options to configure the T2150CD
series computer. It also describes how to set the power on and instant security password to
prevent others from accessing your data.
When you configure the computer with TSETUP, the computer stores your selected values in
memory that is backed up by the internal battery powered Real Time Clock (RTC). Each
time you start the computer, the configuration remains the same as that of the last setting.
NOTE
If the RTC battery fully discharges, configuration data is lost. A
checksum error is displayed when you start the computer and the
system configuration returns to factory preset values.
SYSTEM SETUP of TSETUP
SYSTEM SETUP is an option of the executable file TSETUP.EXE, which is stored in the
DOS subdirectory on your hard disk.
Accessing SYSTEM SETUP
1. At the MS-DOS prompt, type TSETUP and press Enter.
TSETUP displays the SYSTEM SETUP screen.
Figure 11-1 The system setup screen
NOTES
1. The T2150CDS comes with standard 4096KB of memory. The
MEMORY total item displays the actual memory installed.
2. The Panel Power On/Off item appears only when the