Filter
Top Products
Figure 3-2 Connecting the power cord to the computer
2. Plug the other end of the power cord into a live wall outlet. The Battery LED and AC
IN LED will glow.
NOTES
1. Leaving the power cord connected when the computer is not in
use, charges the battery pack.
2. Even when you’re using the power cord, you should have a
battery pack installed to protect the battery contacts.
When you purchase your T2150CD series computer, the battery is completely discharged.
To charge the battery pack so you can operate the computer on battery power, simply leave
the AC power cord connected with the computer’s power turned off. See the Main battery
section in Chapter 4, Operating Basics, for details.
Using 3 1/2" External Diskette Drive
Use the 3 1/2” external diskette drive to transfer data to and from the computer system and to
and from the hard disk.
NOTES
1. The external diskette drive should be placed on a flat,
horizontal surface when in use. Do not set the drive on an
incline greater than 20o while it is operating.
2. Do not set anything on top of the diskette drive.