Filter
Top Products
Press any key to restart the system. The computer reinitializes RAM and resets all soft keys.
The resume failure message may be caused by one or more of these conditions:
The backup battery and the battery pack are completely discharged, and the system is
not receiving power through the AC power cord.
You turned off the power while the system was accessing a disk drive.
You removed the battery pack while operating the computer without the AC power
cord connected.
You turned off the power while the system was sending or receiving data through a serial
port.
You’re running a program that does not use the T2150CD series computer’s BIOS.
Panel Power On/Off
You can set up your T2150CD series computer so that power turns on automatically when
you open the display panel and turns off when you close it.
Refer to Chapter 11, Setup and Password Security, for an explanation of how to enable this
convenient feature.
System Auto Off
This feature turns the system off automatically if it is not used for a set duration.
Refer to Chapter 11, Setup and Password Security, for an explanation of how to set the
duration.
Alarm Power On
This feature lets you set a time for the system to turn on automatically.
Refer to Chapter 11, Setup and Password Security, for an explanation of how to set the
power on timing.