Filter
Top Products
T2150CD series computer is in Resume mode.
3. The Battery Level option appears only when the system
cannot detect the battery charge. For example, when the
battery is replaced.
4. The T2150CDS LDC Display Colors options are 222k and
4096 colors.
Changing Values in the SETUP Menu
1. Press and to move between the two columns. Press and to move between
items in a column.
2. Press either the space bar or BkSp to change the value.
Accepting Changes and Exiting SYSTEM SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message is
displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is displayed:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
2. To make other changes, press N. Repeat the steps above.
3. To accept the changes, press Y.
NOTE
You can press Esc to quit at any time without saving changes.
TSETUP asks you to confirm that you don’t want to save your
changes.
Factory Preset Configuration
When you access TSETUP, the current configuration is displayed.
1. To show the factory preset configuration, press Home.
2. To accept the default settings, press End and then press Y.