Filter
Top Products
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-3
TOSHIBA TE2300
Removing a PC card
To remove the PC card, follow the steps below.
1. Open the Safety Remove Hardware icon on the system tray and
disable the PC card.
2. Press the eject button of the PC card you want to remove to extend
the button.
3. Press the extended eject button to pop the card out slightly.
4. Grasp the PC card and remove it.
Removing the PC card
Memory expansion
You can install additional memory in the computer’s memory module to
increase the amount of RAM.
Only memory modules with the following parts numbers can be installed:
■ PA3127U-1M25 256 MB
■ PA3164U-1M51 512MB
■ PA3278U-1M1G 1024MB
Installing memory module
To install a memory module, make sure the computer is in boot mode
then:
1. Turn the computer off in boot mode. Refer to the Turning off the
power section in Chapter 3.
PC CARD