Filter
Top Products
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Power and Power-Up Modes
6-3
TOSHIBA TE2300
*
3
For the computer to shut down in hibernation mode, the hibernation
feature must be enabled in two places in TOSHIBA Power Saver: the
Hibernate window and the Battery Alarm item of the Alarm window. If
a main battery and a secondary battery are installed, the computer
does not shut down until the charge in both batteries is exhausted.
*
4
When no secondary battery is installed
*
5
When no main battery is installed
When batteries are charged, the main battery is charged first. When it is
fully charged, the secondary battery is charged.
Power indicators
The Main battery, Slim Select Bay, DC IN and Power indicators on the
system indicator panel alert you to the computer’s operating capability
and battery charge status.
Battery indicators
Check the Main battery indicator to determine the status of the main
battery and the Slim Select Bay indicator to determine the status of the
secondary battery. The following indicator lights indicate the battery
status:
Flashing orange The battery charge is low. The AC adaptor must
be connected to recharge the battery.
Orange Indicates the AC adaptor is connected and
charging the battery.
Green Indicates the AC adaptor is connected and the
battery is fully charged.
No light Under any other conditions, the indicator does
not light.
If the battery becomes too hot while it is being charged, the charge will
stop and the battery indicator will go out. When the battery’s temperature
falls to a normal range, charge will resume. This event occurs regardless
of whether the power to the computer is on or off.