Filter
Top Products
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Optional Devices
8-11
TOSHIBA TE2300
Television
A television can be connected to the video out port on the computer.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the
video out port.
Connecting a television
3. Turn the television on.
4. Turn the computer on.
PS/2 mouse
Use the PS/2 keyboard/mouse port on the computer or optional
Advanced Port Replicator to connect a PS/2 mouse.
Make sure the mouse has a cable with a 6-pin connector for the PS/2
mouse port. If the mouse’s cable is not compatible, see your dealer for an
adaptor cable.
1. How the computer treats the connection to a PS/2 mouse depends on
the setting for Pointing Devices under the HW Setup program. If
Simultaneous is selected, you can operate both the AccuPoint II
and the PS/2 mouse. If Auto-Selected is chosen, the AccuPoint II
is disabled when a PS/2 mouse is connected.
2. If you connect a PS/2 mouse to the computer while it is in Standby
mode, you will not be able to use the mouse when you turn the
computer on.
To connect a PS/2 mouse:
1. Turn the computer off.
2. Connect the PS/2 mouse to the PS/2 keyboard/mouse port on the
computer or the mouse port on the optional Advanced Port
Replicator, pressing gently to assure a firm connection.
3. Turn on the computer.