Filter
Top Products
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-18
TOSHIBA TE2300
Modem
This section describes how to connect and disconnect the internal
modem to and from a telephone jack
.
The internal modem does not support voice functions. All data and fax
functions are supported.
1. In case of a lightning storm, unplug the modem cable from the
telephone jack.
2. Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
Region selection
Telecommunication regulations vary from one region to another, so you
will need to make sure the internal modem’s settings are correct for the
region in which it will be used.
To select a region, follow the steps below.
1. In Windows XP, click start, point to All Programs, point to
TOSHIBA Internal Modem and click Region Select Utility.
Do not use the Country/Region Select function in the Modem setup utility
in the Control Panel if the function is available. If you change the
Country/Region in the Control Panel, the change may not take effect.
2. The Region Selection icon will appear in the Windows Task Bar.
The Region Selection icon (Windows XP)
3. Click the icon with the primary mouse button to display a list of
regions that the modem supports. A sub menu for telephony
location information will also be displayed. A check will appear next
to the currently selected region and telephony location.
4. Select a region from the region menu or a telephony location from
the submenu.
■ When you click a region it becomes the modem’s region selection,
and the New Location for telephony will be set automatically.
■ When you select a telephony location, the corresponding region is
automatically selected and it becomes the modem’s current region
setting.
Properties menu
Click the icon with the secondary mouse button to display the following
menu.