Filter
Top Products
TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Getting Started
3-6
TOSHIBA TE2300
Opening the display
The display panel can be rotated in a wide range of angles for optimal
viewing.
1. Slide the display latch on the front of the computer to the right to
unlatch the display panel.
2. Lift the panel up and adjust it to the best viewing angle for you.
When you open the display, hold it with both hands and lift up slowly.
Opening the display panel
Turning on the power
This section describes how to turn on the power.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system (OS) and the OS has started up.
1. If an external diskette drive is connected, make sure it is empty. If a
diskette is in the drive, press the eject button and remove the
diskette.
2. Open the display panel.
3. Press and hold the button for two or three seconds.
Turning on the power
D
ISPLAY
LATCH