TE2300
Version
1
Last
S
aved on 21.05.2003 10:18
ENGLISH using TE2300_Onine.dot –– Printed on 27.05.2003 as
Operating Basics
4-13
TOSHIBA TE2300
Writing CD/DVDs on DVD Multi drive
You can use the DVD Multi drive to write data to either CD-R/-RW or
DVD-R/-RW/-RAM discs.
Important message
Before you write or rewrite to CD-R/-RW or DVD-R/-RW/-RAM disc, read
and follow all set-up and operating instructions in this section. If you fail
to do so, the DVD Multi drive may not function properly, and you may fail
to write or rewrite, lose data or incur other damage.
Disclaimer
TOSHIBA does not bear responsibility for the following:
■ Damage to any CD-R/-RW or DVD-R/-RW/-RAM disc that may be
caused by writing or rewriting with this product.
■ Any change or loss of the recorded contents of CD-R/-RW or DVD-R/
-RW/-RAM disc that may be caused by writing or rewriting with this
product, or for any business profit loss or business interruption that
may be caused by the change or loss of the recorded contents.
■ Damage that may be caused by using third party equipment or
software.
Given the technological limitations of current optical disc writing drives,
you may experience unexpected writing or rewriting errors due to disc
quality or problems with hardware devices. Also, it is a good idea to make
two or more copies of important data, in case of undesired change or loss
of the recorded contents.
Read/write function chart
Disc type CD-R
CD-
RW
DVD-
R
DVD-
RW
DVD-
RAM
DVD
+R
DVD
+RW
Read Yes Yes Yes Yes Yes No No
Write Yes Yes Yes Yes Yes No No
Drag’n Drop CD+DVD*
1
Yes Yes Yes Yes No No No
*
1
Software supplied with the product can be used for writing to a disc.
■ Based on TOSHIBA’s limited compatibility testing, we suggest the
followingmanufacturers of CD-R/-RW and DVD-R/-RW/-RAM disc.
However, in noevent does TOSHIBA guarantee the operation, quality
or performance of anydisc. Disc quality can affect write or rewrite
success rates.