Filter
Top Products
Reception of documents
15
Reception of documents
GB
TOSHIBATF 471
/
15.03 FAX 00
SET RECEIVE MODE ?
If the line is used primarily for telephone traffic If a telephone call is received, the fax
machine is not activated *). The call
must be picked up via the speakerphone
facility (SP phone key) or via the external
telephone. If a fax transmission is
requested, the start key of the fax
machine must be pressed (while the
connection still exists).
Ensure that any fax calls can
indeed be accepted; it is always
necessary to press the START
key.
*) In order to enable the Telephone
Answering Device to be activated
(see page 42) via the remote control
facility, the fax machine enters the
polling standby mode approx. 45
seconds after the first ring. If a
document is then not remotely polled,
the line is released shortly afterwards.
Manual reception (TEL)
INSTALLATION ?
4 x
3 x
ON ?
SET REMOTE RECEIVE ?
standby mode
Start the menu. Press ...
...until this menu item appears.
Confirm.
Press NO ...
...until this menu item appears.
Confirm with YES.
...until this menu item appears.
Confirm with YES.
The machine prompts whether remote
reception is to be activated.
Press YES to activate the menu
item, press NO to deactivate the
item.
Press STOP, return to standby
mode
standby mode
Remote reception
If you have connected the cordless
telephone to your fax machine, it is
possible that you may pick up a call which
is destined for your fax machine. This can
for instance be heard in the form of
periodic whistle. Use the key code 5#
(with pulse dialling = 5) to activate the
fax machine virtually by remote control).
Remote reception can be activated or
deactivated:
15.03 FAX 00
15.03 FAX 00
STOP
YES
YES
YES
YES
NO
NO
NO
COMM. SETTING ?