Filter
Top Products
Transmit documents
Transmit documents
23
GB
TOSHIBATF 471
Automatic fax
messages
To send fax messages in the traditional
manner: Insert document(s), enter the fax
number and the connection is
automatically established.
Please note that you must press
the „❊“ button before the
actual fax number if your fax
machine is connected to a PABX.
STD NORMAL
12345678
123.....
HS NORMAL
15.03 FAX 00
START
DIALING
COMMUNICATION ERROR
Load original
Remember:
Printed side face-down
Wait until the document is pulled in by
2 cm.
Enter the number of the other
machine via the keypad of your
fax machine.
Press START key
The line is checked
If this message continues to be
displayed, this indicates that the
access line is defective, or that
the line type is incorrect (see page 65
”Transmission problems”).
The dialling digits then pass through the
display.
after a brief time:
Your document is now scanned line by
line and transmitted.
If this text is displayed in conjunction with
a long tone, the transmission process has
not been successful. Cancel the display
by pressing the STOP key and attempt to
send the document again. This error
message does not affect subsequent
functioning of the fax machine.
Tips concerning communication errors
are set out on page 64/65.
Error messages continue to be
displayed until they are
acknowledged with the STOP
key.