Filter
Top Products
Advanced settings
59
GB
TOSHIBATF 471
Advanced settings
SET RECEIVE MODE ?
Set transmission header
position
The transmission header contains the
code, the name, time of transmission and
the current page number. Normally it
appears in the top 5 mm of the incoming
copy. If this area contains important
information, this information is overwritten
by the transmission header. In order to
prevent this from happening, you are able
to displace the transmission header.
Accordingly, the transmission header is first
printed before the copy is printed. The
effect is that the length of the incoming
copy is extended by approx. 5 mm.
In Germany, the code must be
specified!
standby mode
Start the menu. Press ...
...until this menu item appears.
Confirm with YES.
Press NO ...
...until this menu item appears.
Confirm with YES.
Press NO ...
...until this menu item appears.
Confirm with YES.
Specify the current position
Press NO ...
• INSIDE?
• OUTSIDE?
...until the desired menu item appears
(here: outside transmission header)
Confirm with YES.
3 x
INSTALLATION ?
4 x
COMM. SETTING ?
SET REMOTE RECEIVE ?
3 x
SET TTI ?
INSIDE ?
OUTSIDE ?
15.03 FAX 00
YES
NO
YES
YES
YES
NO
NO
NO