Filter
Top Products
V
ariable Request: Displays whether the local client supports variable request. If
supports, the local client can send some variable requests to the
remote client to learn about the link status from the response of
the remote client.
PDU Revision: Displays the Information TLV revision of Information OAMPDU.
Operation Status: Displays the operating status of the OAM connection.
Disable: OAM is disabled on this port.
LinkFault: The link has detected a fault and is transmitting
OAMPDUs with a link fault indication.
PassiveWait: The port is in passive mode and is waiting to
see if the peer device is OAM capable.
ActiveSendLocal: The port is in active mode and is sending
local information.
SendLocalAndRemote: The local port has discovered the
peer but has not yet accepted or rejected the configuration of
the peer.
SendLocalAndRemoteOK: The local device agrees the OAM
peer entity.
PeeringLocallyRejected: The local OAM entity rejects the
remote peer OAM entity.
PeeringRemotelyRejected: The remote OAM entity rejects the
local device.
NonOperHalfDuplex: Since Ethernet OAM functions are not
designed to work completely over half-duplex ports. This
value indicates Ethernet OAM is enabled but the port is in
half-duplex operation.
Loopback Status: Displays the loopback status.
No Loopback: Neither the local client nor the remote client is
in the loopback mode.
Local Loopback: The local client is in the loopback mode.
Remote Loopback: The remote client is in the loopback mode.
Remote Client
The local client part shows the information of the remote OAM entity.
Mode: Displays the OAM mode of the remote client.
Mac Address: Displays the MAC address of the remote client.
Vendor(OUI): Displays the vender’s OUI of the remote client.
An OUI address is a unique identifier assigned by IEEE to a
device vendor.
Max OAMPDU: Displays the maximum size of the OAMPDU.
Remote Loopback: Displays whether the remote client supports remote loopback
function.
Unidirection: Displays whether the remote client supports unidirectional OAM
operation.
Link Monitoring: Displays whether the remote client supports link monitoring
function.
Variable Request: Displays whether the remote client supports variable request.
11
9