Filter
Top Products
Figure 15-8 NTDP Config
The following entries are displayed on this screen:
Global Config
NTDP: Enable/Disable NTDP for the switch globally.
NTDP Interval Time: Enter the interval to collect topology information. The default is 1
minute.
NTDP Hops: Enter the hop count the switch topology collects. The default is 3
hops.
NTDP Hop Delay: Enter the time between the switch receiving NTDP request
packets and the switch forwarding NTDP request packets for the
first time. The default is 200 milliseconds.
NTDP Port Delay: Enter the time between the port forwarding NTDP request packets
and its adjacent port forwarding NTDP request packets over. The
default is 20 milliseconds.
Port Config
Select: Select the desired port for NTDP status configuration.
Port: Displays the port number of the switch.
NTDP: Displays NTDP status (enabled or disabled) of the current port.
255