Filter
Top Products
Figure 3-5 Login
Tips:
After logging in to the switch, you can add a global IPv6 address to your switch manually in 4.1.6
System IPv6. Then you can configure your PC’s global IPv6 address in the same subnet and login
to the switch via its global IPv6 address. For the detailed instructions, please refer to Appendix B.
3.2 Configuration
After a successful login, the main page will appear as Figure 3-6, and you can configure the
function by clicking the setup menu on the left side of the screen.
Figure 3-6 Main Setup-Menu
Note:
Clicking Apply can only make the new configurations effective before the switch is rebooted. If
you want to keep the configurations effective even the switch is rebooted, please click Save
12