Filter
Top Products
Figure 5-7 Detail Information
5.2.2 Static LAG
On this page, you can manually configure the LAG. The LACP feature is disabled for the member
ports of the manually added Static LAG.
Choose the menu Switching→LAG→Static LAG to load the following page.
Figure 5-8 Static LAG Config
The following entries are displayed on this screen:
LAG Config
Group Number: Select a Group Number for the LAG.
Description: Give a description to the LAG for identification.
LAG Table
Member Port: Select the port as the LAG member. Clearing all the ports o
f
the LAG will delete this LAG.
50