Filter
Top Products
Protocol VLAN Table
Select: Select the desired entry. It is multi-optional.
Protocol: Displays the protocol template of the VLAN.
Ether Type: Displays the Ethernet protocol type field in the protocol template.
VLAN ID: Displays the corresponding VLAN ID of the protocol.
Operation: Click the Edit button to modify the settings of the entry. And click the
Modify button to apply your settings.
6.3.2 Protocol Template
The Protocol Template should be created before configuring the Protocol VLAN. By default, the
switch has defined the IP Template, ARP Template, RARP Template, etc. You can add more
Protocol Template on this page.
Choose the menu VLAN→Protocol VLAN→Protocol Template to load the following page.
Figure 6-10 Create and View Protocol Template
The following entries are displayed on this screen:
Create Protocol Template
Protocol Name: Give a name for the Protocol Template.
Ether Type: Enter the Ethernet protocol type field in the protocol template.
Protocol Template Table
Select: Select the desired entry. It is multi-optional.
Protocol Name: Displays the name of the protocol template.
Ether Type: Displays the Ethernet protocol type field in the protocol template.
Note:
The Protocol Template bound to VLAN can not be deleted.
72