Filter
Top Products
Basic Setup and Traffic Meter
13
Verizon 4G LTE Router MBR1515LVW
Table 1 describes each LED and button on the front panel of the router.
Table 1. LED descriptions
LED Activity Description
WPS Press the WPS button to open a 2-minute window for the router to connect with other
WPS-enabled devices. For more information about this function, see Use Push 'N' Connect
(WPS) to Configure Your Wireless Network on page 36.
Wi-Fi This button can be used to control the Wi-Fi radio or both the Wi-Fi radio and mobile
broadband radio. Use the router interface to select the options. The default is set for Wi-Fi
radio only.
Power Solid green The router is turned on and operating normally.
Solid amber POST (power-on self-test) is in progress.
Off Power is not supplied to the router.
Internet Port Solid green An Internet connection is established.
Solid amber Traffic meter limit has been reached; traffic is blocked.
Blinking green Data is being transmitted over the Internet connection.
Blinking amber Traffic meter limit has been reached, but traffic is not blocked.
Blinking green and amber Failover from WAN to mobile broadband occurred.
Off No Internet connection is detected.
Wi-Fi Solid blue The Wi-Fi local port is initialized.
Blinking blue Data is being transmitted or received over the Wi-Fi link.
Off The wireless access point is turned off.
LAN Ports Solid green The local Ethernet ports have detected wired links with computers.
Blinking Data is being transmitted or received.
Off No link is detected on these ports.
WAN Port Solid green The Ethernet WAN port has detected an active link.
Blinking Data is being transmitted or received.
Off No link is detected on these ports.
4G LTE Solid blue The router is in 4G LTE coverage.
Off No coverage is detected.