Filter
Top Products
Wi-Fi Settings
39
Verizon 4G LTE Router MBR1515LVW
3. Click Next and select the PIN Number radio button. The following screen displays.
4. Go to the client wireless computer. Run a WPS configuration utility. Follow the utility’s
instructions to generate a PIN. Take note of the client PIN.
5. In the router Add
WPS Client screen, enter the client PIN number and click Next.
• The router tries to communicate with the client
for 4 minutes. If no WPS clients
connect during this time, the router wireless settings do not change.
• The router WPS screen confirms that the client
was added to the wireless network.
The router generates an SSID and implements WPA/WPA2 wireless security.
6. Note the new SSID and WPA/WPA2 password for the wireless network. You can view these
se
ttings in the Wi-Fi Settings screen. See Manually Configure Your Wireless Settings on
page 32.
To access the Internet from any computer connect
ed to your router, launch an Internet
browser. You should see the router’s Internet Port LED blink.
Add Wireless Computers That Do Not Support WPS
If you set up your network with WPS, and now you want to add a computer that does not
support WPS, you must manually configure that computer. For information about how to view
the wireless settings for the router, see Manually Configure Your Wireless Settings on
page 32.
Because WPA randomly creates the SSID and WPA/WPA2 keys, they might be difficult to
type or remember (that is one reason why the network is so secure). You can change the
wireless settings so that they are easier for you to remember. When you do that, you have to
set up the WPS-compatible computers again.
Note: When you make these changes, all wireless computers and devices
disconnect from network. You then have to set them up with the new
wireless settings.
To change wireless settings for the network:
1. Use an Ethernet cab
le to connect a computer to the router. That way you do not get
disconnected when you change the wireless settings.