Filter
Top Products
Wi-Fi Settings
34
Verizon 4G LTE Router MBR1515LVW
• Does your wireless device or computer appear on the Attached Devices screen (see
Attached Devices on page 52
)? If it does, it is connected to the network.
• If you are not sure what the network name (SSID) or p
assword is, look on the label on
the side of your router (see Router Label on p
age 15).
Configure WPA, WPA2, or WPA + WPA2
Both WPA and WPA2 provide strong data security. WPA with TKIP is a software
implementation that can be used on Windows systems with Service Pack 2 or later; WPA2
with AES is a hardware implementation; see your device documentation before implementing
it. Consult the product documentation for your wireless adapter for instructions for configuring
WPA settings.
Push 'N' Connect (WPS) implements WPA/WPA2 wireless security on the router and your
wireless computer or device at the same time. The wireless computer or device must be
compatible with WPS.
Note: If you use a wireless computer to configure wireless security
settings, you are disconnected when you click Apply. If you are
disconnected, reconfigure your wireless computer to match the new
settings, or access the router from a wired computer to make further
changes.
To configure WPA or WPA2 in the router:
1. Log in to the router as describe
d in Log In to Your Router on page 17.
2. From the main menu, select Wi
-Fi Settings > Wi-Fi Profile.
3. On the Wi-Fi Profile screen in the Security Options section, select the radio button for the
WPA or WPA2 option of your choice.
4. For WPA-PSK or WPA2-PSK, enter the passphrase.
5. To save your settings, click Apply.