Filter
Top Products
Advanced
66
Verizon 4G LTE Router MBR1515LVW
Port Forwarding/Port Triggering
By default, the router blocks inbound traffic from the Internet to your computers except for
replies to your outbound traffic. Create exceptions to this rule for these purposes:
• T
o allow remote computers on the Internet to access a server on your local network.
• T
o allow certain applications and games to work correctly when your router does not
recognize their replies.
Your router provides two features for creatin
g these exceptions: port forwarding and port
triggering. The next sections provide background information to help you understand how
port forwarding and port triggering work, and the differences between the two.
Remote Computer Access Basics
When a computer on your network accesses a computer on the Internet, your computer
sends your router a message containing the source and destination address and process
information. Before forwarding your message to the remote computer, your router has to
modify the source information and create and track the communication session so that
replies can be routed back to your computer.
Here is an example of normal outbound traffic and the resulting inbound responses:
1. Y
ou open a browser, and your operating system assigns port number 5678 to this
browser session.
2. Y
ou type http://www.example.com into the URL field, and your computer creates a web page
request message with the following address and port information. The request message is
sent to your router.
Source address. The
IP address of your computer.
Source port number. 567
8, which is the browser session.
Destination address. The I
P address of www.example.com, which your computer finds
by asking a DNS server.
Destination port number. 80, which is th
e standard port number for a web server
process.
3. Y
our router creates an entry in its internal session table describing this communication
session between your computer and the web server at www.example.com. Before sending
the web page request message to www.example.com, your router stores the original
information and then modifies the source information in the request message, performing
Network Address Translation (NAT):
• The source
address is replaced with the public IP address of your router. This step is
necessary because your computer uses a private IP address that is not globally
unique and cannot be used on the Internet.
• The source
port number is changed to a number that is chosen by the router, such as
33333. This step is necessary because two computers could independently be using
the same session number.