Filter
Top Products
Advanced
69
Verizon 4G LTE Router MBR1515LVW
192.168.1.123.” The following sequence shows the effects of the port forwarding rule you
have defined:
1. The user of a remote computer opens a browser and requests a web page from
www.example.com, which resolves to the public IP address of your router. The remote
computer composes a web page request message with the following destination
information:
Destination address.
The IP address of www.example.com, which is the address of your
router.
Destination port number. 8
0, which is the standard port number for a web server
process.
The remote computer then sends this request message through the Internet to your
ro
uter.
2. Y
our router receives the request message and looks in its rules table for any rules covering
the disposition of incoming port 80 traffic. Your port forwarding rule specifies that incoming
port 80 traffic is forwarded to local IP address 192.168.1.123. Therefore, your router
modifies the destination information in the request message:
The destination address is replaced with 192.168.1.123.
Your router then sends this request message to your local network.
3. Y
our web server at 192.168.1.123 receives the request and composes a return message
with the requested web page data. Your web server then sends this reply message to your
router.
4. Y
our router performs Network Address Translation (NAT) on the source IP address, and
sends this request message through the Internet to the remote computer, which displays the
web page from www.example.com.
To configure port forwarding, you need to know which in
bound ports the application needs.
Usually you can determine this information by contacting the publisher of the application or
the relevant user groups and news groups.
How Port Forwarding Differs from Port Triggering
The following points summarize the differences between port forwarding and port triggering:
• Por
t triggering can be used by any computer on your network, although only one
computer can use it at a time.
• Por
t forwarding is configured for a single computer on your network.
• Por
t triggering requires specific outbound traffic to open the inbound ports, and the
triggered ports are closed after a period of no activity.
• Por
t forwarding is always active and is never triggered.