Filter
Top Products
Advanced
62
Verizon 4G LTE Router MBR1515LVW
- Fragmentation Length, CTS/RTS Threshold, and Preamble Mode. These
settings should be left at their default values.
• WPS Settings. Se
e Use Push 'N' Connect (WPS) to Configure Your Wireless
Network o
n page 36.
- Route
r’s PIN. The PIN number used for Push 'N' Connect.
- Disab
le Router’s PIN. By default, this check box is cleared. When the check box
is selected, this setting allows the WPS clients to discover the router’s PIN.
- Keep
Existing Wi-Fi Settings. By default, this check box is cleared. When the
check box is selected, this setting allows the router to automatically generate the
SSID and WPA/WPA2 security settings when it implements WPS. After WPS is
implemented, the router automatically selects the Keep Existing Wi-Fi Settings
check box so that your SSID and wireless security settings remain the same if
other WPS-enabled devices are added later.
• W
i-Fi Card Access List. See Restrict Access by MAC Address on page 63.
Wireless Station Access Control
By default, any wireless computer configured with the correct SSID and wireless security
settings is allowed access to your wireless network. You can use wireless access point
settings in the Advanced Wi-Fi Settings screen to further restrict wireless access to your
network:
• T
urn off wireless connectivity completely.
You can completely turn off the wireless portion
of the router. For example, if you use your
notebook computer to connect wirelessly to your router, and you take a business trip, you
can turn off the wireless portion of the router while you are traveling. Other members of
your household who use computers connected to the router with Ethernet cables can still
use the router. To make this change, clear the Enable Wi-Fi Router Radio check box in
the Advanced Wi-Fi Settings screen and click Apply.
• Hide you
r wireless network name (SSID).
By default, the router is set to broadcast its wireless network name (SSID). You can
rest
rict wireless access to your network by not broadcasting the wireless network name
(SSID). To make this change, clear the Enable SSID Broadcast check box on the
Advanced Wi-Fi Settings screen and click Apply. Wireless devices do not see your
router. You must configure your wireless devices to match the wireless network name
(SSID) of the router.
Note: The SSID of any wireless access adapters must match the SSID you
configure in the router. If they do not match, you do not get a
wireless connection to the router.