Filter
Top Products
132
Wireless Broadband Router User Manual
133
Chapter 8 Using Advanced Settings
2. If the host was manually added to the DNS Table, its host name and/or IP
address can be modified. Otherwise, only modify its host name.
3. Click Apply to save the changes.
To remove a host from the DNS table:
Click the appropriate “Delete” icon in the Action column. The entry will be
removed from the table.
Network Objects
Network objects is used to define a part of the Router’s network (a group of
computers, for example) by MAC addresses, IP addresses, and/or host names. The
defined part becomes a “network object,” and settings, such as configuring system
rules, can be applied to all the devices defined as part of the network object at once.
For example, instead of setting the same website filtering configuration to five com-
puters one at a time, the computers can be defined as a network object, and website
filtering configuration can then be applied to all the computers simultaneously.
Network objects can be used to apply security rules based on host names instead
of IP addresses. This may be useful, since IP addresses change from time to time.
Moreover, it is possible to define network objects according to MAC addresses, mak-
ing rule application more persistent against network configuration settings.
To define a network object:
1. Click Network Objects in the Advanced screen. The “Network Objects” screen
appears.