Filter
Top Products
84
Wireless Broadband Router User Manual
85
Chapter 6 Configuring the Router’s Security
To use port triggering:
1. Select Port Triggering from the left side of any Security screen. The “Port
Triggering” screen appears.
2. Select either “Specify Protocol” or “Show All Services” from the drop-down list
next to “Add.”
3. Click Add. An “Edit Service” screen appears.
4. Specify the port triggering entries by clicking New Trigger Ports and New
Opened Ports and entering the protocol and protocol number in the succeed-
ing screens. For example, to set up port triggering for the scenario laid out on
the previous page, the service ports would be set to UDP and 2222, while the
opened ports would be set to UDP and 3333.