Filter
Top Products
94
Wireless Broadband Router User Manual
95
Chapter 6 Configuring the Router’s Security
sage has been blocked.
• ICMP redirect protection - an ICMP redirected message has been blocked.
• Packet invalid in connection - an invalid connection packet has been
blocked.
• ICMP protection - a broadcast ICMP message has been blocked.
• Broadcast/Multicast protection - a packet with a broadcast/multicast
source IP has been blocked.
• Spoofing protection - a packet from the Internet with a source IP belong-
ing the local network has been blocked.
• DMZ network packet - a packet from a demilitarized zone network has
been blocked.
• Trusted device - a packet from a trusted device has been accepted.
• Default policy - a packet has been accepted/blocked according to the
default policy.
• Remote administration - a packet designated for the Router management
has been accepted/blocked.
• Access control - a packet has been accepted/blocked because of an access
control rule.
• Parental control - a packet has been blocked because of parental control.
• NAT out failed - NAT failed for this packet.
• DHCP request - the Router sent a DHCP request (depends on the distribu-
tion)
• DHCP response - the Router received a DHCP response (depends on the
distribution)
• DHCP relay agent - a DHCP relay packet has been received (depends on
the distribution)
• IGMP packet - an IGMP packet has been accepted.
• Multicast IGMP connection - a multicast packet has been accepted.
• PPTP connection - a packet inquiring whether the Router is ready to