Filter
Top Products
21
21
Index
Index
Contents
Contents
POSITIONING
CLICKING
To position the screen cursor, move the pen slightly above
the Cintiq screen without touching the screen surface.
Press the pen tip on the screen to make a selection.
Note: Calibrating the Cintiq
ensures correct alignment of
the screen cursor with the pen tip. If the screen
cursor does not jump to a position near the pen tip
when you place the pen on the screen, then the
Cintiq software driver may not be installed or is not
loading. Install the driver software if necessary.
Otherwise, see troubleshooting
.
Tap the screen once with the pen tip, or touch the pen to the
screen with enough pressure to register a click.
Tip
: Configure Windows 7 to select when hovering the pen over
an icon and to launch the icon with a single click. To turn
on this feature, first open a folder. From the O
RGANIZE pull-
down menu choose F
OLDER AND SEARCH OPTIONS. From the
G
ENERAL tab select SINGLE-CLICK TO OPEN AN ITEM (POINT TO
SELECT).
Press the upper side switch
(when set to D
OUBLE CLICK),
or quickly tap the screen
twice in the same place with
the pen tip. Double-clicking
is easier when using the pen
perpendicular to the Cintiq’s
screen.