Filter
Top Products
49
49
Index
Index
Contents
Contents
WORKING WITH DISPLAY TOGGLE
A Display Toggle feature is available only on multiple monitor systems. Set an ExpressKey or pen side
switch to the D
ISPLAY TOGGLE function. Then press that button to toggle the screen cursor between Cintiq
and your other displays. For example, Cintiq can be used as a pen display where the cursor is positioned at
the pen tip location, or toggled for use as a standard Wacom Tablet where the cursor can be moved across
the entire desktop or any display on your system.
Open the Wacom Tablet control panel and make sure Cintiq is the selected T
ABLET. The DISPLAY TOGGLE tab
will be available if the system has two or more displays. The options on this tab define how the tablet
mapping is applied to each toggled display.
ACTIVE AREA options determine the size of the area where the pen will
function on the pen display.
•F
ORCE PROPORTIONS adjusts the size of the active area to
maintain correct vertical and horizontal proportions between
Cintiq and the entire desktop or newly mapped-to display.
Depending on your settings, some portions of the active area
may no longer be usable when this option is selected. When
deselected, the correct scale or proportions are not maintained.
For example, drawing a circle on the pen display may create an
ellipse on a mapped-to screen.
•U
SE INSET AREA limits the active area to a sizing of 6 x 8 inches. If
F
ORCE PROPORTIONS is also selected, this sizing may be less.
When deselected, as much of the active area as possible will be
used for tablet-to-display mapping.
Your selection is shown by the red box in the A
CTIVE AREA diagram.
•P
EN DISPLAY TO DESKTOP toggles the
screen cursor from Cintiq to the entire
system desktop. Press the button a
second time to return the cursor to
Cintiq.
•P
EN DISPLAY TO OTHER DISPLAYS toggles
the screen cursor from Cintiq to
another active pen display or monitor.
The cursor toggles to each connected
display in turn until it returns to the
Cintiq from where the initial toggle
began.
Important: When using application-specific
settings with Display Toggle, be sure each
customized application (including A
LL
O
THER) has a tool button to which DISPLAY
T
OGGLE has been assigned. The easiest way
to do this is to assign D
ISPLAY TOGGLE to an
ExpressKey before creating any
application-specific settings.