Filter
Top Products
6Printing
6-46 Xerox Phaser 3200MFP
Using Your Machine with a Macintosh (Phaser 3200MFP/N only)
Your machine supports Macintosh systems with a built-in USB interface or a
10/100 Base-TX network interface card. When you print a file from a
Macintosh computer, you can use the PostScript driver by installing the PPD
file.
Installing Software for Macintosh
The PostScript driver CD-ROM that came with your machine provides you with the
PPD file to use the PS driver, Apple LaserWriter driver, for printing on a Macintosh
computer.
Also, it provides you with the TWAIN driver for scanning on a Macintosh
computer.
Verify the following before you install the printer software:
Install the Printer driver
1. Connect your machine to the computer using the USB cable or the
Ethernet cable.
2. Turn on your computer and the machine.
3. Insert the PostScript driver CD-ROM which came with your machine into
the CD-ROM drive.
4. Double-click the Xerox MFP on your Macintosh desktop.
5. Double-click the MAC_Installer folder.
6. Double-click the MAC_Printer folder.
7. Double-click the Xerox Phaser 3200MFP_OSX icon.
8. Click Continue.
9. Click Install.
10. After the installation is finished, click Quit.
Item Requirements
Operating System Mac OS 10.3 ~ 10.4
RAM 128 MB
Free Disk Space 200 MB