Filter
Top Products
2 Getting Started
2-12 Xerox Phaser 3200MFP
Installing Printer Software
NOTE: You must install software using the supplied CD-ROM after you have
set up your machine and connected it to your computer. For details, see
Chapter 6, Printing.
The CD-ROM provides you with the following software:
Programs for Windows
To use your machine as a printer and scanner in Windows, you must install
the MFP driver. You can install some or all the following components:
•
Printer driver
- Use this driver to take full advantage of your printer’s
features.
•
Scan driver
- TWAIN and Windows Image Acquisition (WIA) driver is
available for scanning documents on your machine.
•
ControlCentre
-
Use this program to create phonebook entries and configure
the destination of the scan button. You can also update the firmware of the
machine.
• Status Monitor- This program appears when printing error occurs.
•
Network Scan
: This program allows you to scan a document on your
machine and save it to a network-connected computer
(Phaser 3200MFP/N only).
Macintosh Driver (Phaser 3200MFP/N only)
You can print and scan to and from Macintosh operating systems using your
machine.
Linux Driver
You can print and scan to and from Linux operating systems using your
machine. (Direct and Network)