Filter
Top Products
10 Troubleshooting
10-26 Xerox Phaser 3200MFP
Common PostScript Problems (Phaser 3200MFP/N Only)
The following situations are PS language specific and may occur when several
printer languages are being used.
NOTE: To receive a printed or screen-displayed message when PostScript
errors occur, open the Print Options window and click the desired selection
next to the PostScript errors section
Condition Suggested solutions
PostScript file cannot
be printed.
The PostScript driver may
not be installed correctly.
• Install the PostScript
driver.
• Print a configuration page
and verify that the PS
version is available for
printing.
• If the problem persists,
contact a service
representative.
“Limit Check Error”
message appears.
The print job was too
complex.
You might need to reduce
the complexity of the page
or install more memory.
A PostScript error page
prints.
The print job may not be
PostScript.
Make sure that the print job
is a PostScript job. Check
to see whether the software
application expected a
setup or PostScript header
file to be sent to the
machine.
When print a document
in Macintosh with
Acrobat Reader 6.0 or
higher, colors print
incorrectly.
The resolution setting in the
printer driver may not be
matched with that in
Acrobat Reader.
Make sure that the
resolution setting in your
printer driver matches that
in Acrobat Reader.