Filter
Top Products
16 Installing user software on a PC-compatible computer
T
O
VERIFY
THE
INFORMATION
IN
THE
NET.CFG
FILE
FOR
W
INDOWS
3.1
AND
IPX:
• In the Link Driver section of the file, make sure that the Ethernet Frame Type matches
what is set on your Fiery SI.
You can print the Configuration page from the Fiery SI Control Panel to see the
current setting.
T
O
MODIFY
THE
AUTOEXEC.BAT
FILE
FOR
W
INDOWS
3.1
X
AND
A
PPLE
T
ALK
:
1. Make a backup copy of your AUTOEXEC.BAT file and give it a unique name.
This file is usually stored in the C directory, at the root level.
It is always a good idea to make a backup copy of your AUTOEXEC.BAT file before
you change it.
2. Use a text editor to open the AUTOEXEC.BAT file.
3. After the network software commands or at the end of the file, add the following lines:
C:\FierySI\APPL_TSR.EXE
C:\FierySI\APPLINIT.EXE
If you are using PhoneNET PC, insert the lines after the
CALL C:\PHONENET\ABOTH
command
.
If you are using COPSTalk, insert the lines after the last of the following commands:
COPSNODE
,
COPSLPT
,
COPSHARE
,
CSHARE
. (The last three may not be present; they are
optional.)
If your system uses a drive letter other than C: or you named the FierySI directory
something other than “FierySI,” type the correct path for your system.
NWPOPUP.EXE
NETWARE.DRV
NWGDI.DLL
IPXODI.COM
From this location: Drag these files: To this location: