Filter
Top Products
38 Installing user software on a PC-compatible computer
NOTE: You must enable TCP/IP printing to ensure that all files required for IPX/SPX
will be installed. You can select it and click Remove after you set up IPX/SPX if you do
not need to use the TCP/IP protocol.
4. Double-click the IPX/SPX-compatible Protocol icon.
5. Click Advanced.
6. In the Property list, click Frame Type and select the Frame Type that corresponds to
the one set during Fiery SI Control Panel Setup.
Print the Configuration page from the Control Panel to see the Frame Type if
necessary.
NOTE: Do not select Auto, this may not select the Frame Type specified on the
Fiery SI.
7. Click OK and close the Network Control Panel.