Filter
Top Products
PRINT FORMAT COMMANDS
6-48 XEROX DOCUPRINT 180 LPS PDL REFERENCE
Considerations Page detail parameters (SEQ, PRA, TXT) are used in a BTEXT
command for every page for which detailed auditing is desired.
These parameters are meaningless without bar code text printed on
the page, or bar code reader.
PRD=
yy-mm-dd
Process date. If specified, it prints in the audit report
header.
SEQ=
sss
Sequence number. It may be up to five digits, for a
maximum value of 65534. This is required in order to
identify non-delivered, out of sequence, or duplicate
pages. The value of this parameter must match the
bar code text to be printed on the page.
Note: This parameter is required if the PRA or TXT
parameters are present.
PRA=
nnn
Page reconciliation amount. This is the total value of
the page, up to 11 digits plus a decimal point may be
specified. Commas are not allowed. This option is
required in order to print an audit report reconciliation
on amount.
Note: This parameter is dependent upon the SEQ
parameter.
TXT=
xx...x
Identifying text. It may be up to 64 characters. If
present, prints as detail information for each page
expected or delivered as reported on the audit report.
Note: This parameter is dependent upon the SEQ
parameter.
NONE Specifies no BTEXT.
The default is NONE.
Table 6-36. BTEXT parameter option(s) and definition(s)
Option(s) Definition(s)