Filter
Top Products
SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
8-22 XEROX DOCUPRINT 180 LPS PDL REFERENCE
BSKIP
Note: The DocuPrint 180 LPS does not support the barcode option.
This syntax will cause the error message "Barcode reader not found
continue I or Abort I" will be displayed at the beginning of the job.
This parameter specifies allows processing of barcode data streams
with the ability to cross-check the three components of the system,
namely, the PC-UI, the ESS and the IOT. By cross-checking, the
DocuPrint 180 ensures that any barcode sheets printed has been
accounted for by each component of the software.
Syntax BSKIP =
option(s)
Options Table 8-13 lists the parameter option(s) and definition(s).
BSIDE
Note: The DocuPrint 180 LPS does not support the barcode option.
This syntax will cause the error message "Barcode reader not found
continue I or Abort I" will be displayed at the beginning of the job.
This parameter allows processing of barcode data streams with the
ability to cross-check the three components of the system, namely,
the PC-UI, the ESS and the IOT. By cross-checking, the DocuPrint
180 ensures that any barcode sheets printed has been accounted for
by each component of the software.
Syntax BSIDE =
option(s)
Options Table 8-14 lists the parameter option(s) and definition(s).
Table 8-13. BSKIP parameter option(s) and definition(s)
Option(s) Definition(s)
READ Indicates that all presented sides of all sheets will
be scanned for barcode information, regardless of
the presence information for that sheet. Barcodes
encountered when none are expected generate an
error condition.
SKIP Denotes that barcode information is processed only
for pages with presence information indicating that
barcodes are expected. In other words, barcodes
encountered when none are expected are ignored.
The default is SKIP.