Filter
Top Products
PRINT FORMAT COMMANDS
XEROX DOCUPRINT 180 LPS PDL REFERENCE 6-91
• Paper sizes
The PAPERSIZE parameter is not supported as a DJDE.
Therefore, a JDE page-oriented DJDE that calls out the desired
paper size is needed.
— When specifying paper sizes, if the JSL specifies the paper
size using the keyword method (such as USLEGAL, A4, or
B4), then the FSL must also use the same method. If the
JSL specifies 8.5,14 and FSL specifies USLEGAL, the
INPUT will display an error message.
OS6670 FORM PAPER SIZE TOO SMALL. FORM WILL
NOT BE PRINTED or OS6680 FORM PAPER SIZE TOO
LARGE. FORM WILL NOT BE PRINTED.
USLETTER and B4 are the only exceptions to this rule
where the keyword and x, y method will not create any
incompatibilities.
— When printing system pages, if SYSPAGE=cluster is not
specified, then INPUT will default to cluster MAIN.
SYSPPR defines the paper size to use for the system
page. Therefore, if cluster MAIN contains a mix of
USLETTER and USLEGAL, then OUTPUT will search for
the appropriate tray that contains the required paper size. If
SYSPPR is not defined, then INPUT will use the current
job's paper size.
• SYSPPR
The SYSPPR parameter will take effect for the following system
pages:
— DJDE error page (OPRINFO parameter of the IDEN
command)
— Tape label page (PLABEL parameter of the VOLUME
command)
— Report delimiter page (PRINT parameter of the RSTACK
command)
— Accounting page (ACCT command)
— Graphic error summary page
— Short-Edge Feed error page
SYSPPR defines a paper size, whereas SYSPAGE defines a
cluster-name reference. Both parameters must agree in order
to prevent errors, similar to the way the FEED and PAPERSIZE
parameters interrelate to each other.