Filter
Top Products
USING LOGICAL PROCESSING
7-22 XEROX DOCUPRINT 180 LPS PDL REFERENCE
RFEED command
The logical processing RFEED command allows you to change
cluster names on a page-by-page basis without using DJDEs. The
RFEED command allows you to specify paper fed from different
clusters if certain criteria are met on a record basis. RFEED is
essentially an extension of the RAUX command in that it allows you
to specify virtually any cluster-name or cluster-reference without
being limited to the AUX cluster.
The following section describes the syntax of the command
parameters and explanations of the parameter options.
TEST
This parameter allows you to specify paper fed from different clusters
if certain criteria are met on a record basis.
Syntax RFEED TEST =
option(s)
Options Table 7-16 lists the parameter option(s) and definition(s).
There is no default.
Table 7-16. TEST parameter option(s) and definition(s)
Option(s) Definition(s)
((
test-exp
,
clu-def
)[,...])
This option has the following components:
•
test-exp
References a criteria table to be used.
•
clu-def
Defines the cluster to use for the page, (either a
cluster-name or a cluster-reference).