Filter
Top Products
PRINT FORMAT COMMANDS
XEROX DOCUPRINT 180 LPS PDL REFERENCE 6-73
OFFSET
This parameter specifies offset control on a report basis.
Syntax OUTPUT OFFSET =
option(s)
Options Table 6-55 lists the parameter option(s) and definition(s).
The OFFSET control of FIRST, ALL, or NONE may be modified by
the ROFFSET command (refer to the “Report offsetting on a record”
section in the chapter “Using logical processing commands”). If
OFFSET=FIRST or ALL and ROFFSET criteria is satisfied on page
one of a report, the normal offset from the preceding report is
nullified. No change should be made to the OFFSET parameter in a
selected JDE.
Table 6-56. OFFSET parameter option(s) and definition(s)
Option(s) Definition(s)
ALL Results in an offset of each copy of each report.
The default is ALL.
FIRST Specifies that an offset is to occur only on the first
copy of a report.
NONE Specifies that there is to be no offset at any time.