Filter
Top Products
SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
XEROX DOCUPRINT 180 LPS PDL REFERENCE 8-17
Effect of multiple logical pages
If multiple BEGINs are being used to define multiple logical pages on
one physical page (as described in the “Multiple logical pages on
physical page” section in the chapter "Print format commands") the
following points should be considered:
• With the exception of DEPT and SHIFT, all page-oriented
DJDEs are applied at a logical page boundary.
• The following DJDEs, when applied, cause the current page
position to be set to the first logical page of the front side of a
new physical sheet:
—DUPLEX
—COPIES
—JDL
—JDE
—BFORM
— OTEXT
—RTEXT
—FEED
• The following DJDEs, when applied, cause the current page
position to be set to the first logical page of the next physical
side:
—FORMS
—FORMAT
— BEGIN
—PMODE
—FONTS
COPIES=processing
If the system is approaching disk saturation, the output task may
have already released disk space for a report that increases its copy
count from an initial count of one to a higher number. To avoid this,
do one of the following:
• Set the number of copies of the first page to 2 or higher.
• Include a copy-sensitive CME.
• Use the COPIES parameter in the START command.