Filter
Top Products
PRINT FORMAT COMMANDS
XEROX DOCUPRINT 180 LPS PDL REFERENCE 6-105
Examples
This section shows examples of using the PDE command.
Example 1
PDE1: PDE
PMODE=LANDSCAPE,BEGIN=(.861,.7),FONTS=(L0112B,
L01BOB);
PDE2: PDE
PMODE=PORTRAIT,BEGIN=(1.3,.37),FONTS=((P08TYA,6.8,
(P080AA,6.8));
LI: JDE;
OUTPUT FORMAT=PDE1;
P1: JDE;
OUTPUT FORMAT=PDE2;
Two PDEs are defined and referenced in separate JDEs. PDE1
specifies a landscape page and two landscape fonts; PDE2 defines
a portrait page and 2 portrait fonts with override line spacing.
Example 2
2UP: PDE BEGIN=(.5 IN,.5 IN),BEGIN=(6.5 IN,.5 IN),
PMODE=PORTRAIT,FONTS=P1012B;
Example of multiple BEGINs. Two logical pages are defined on one
physical page.
Example 3
PDE99:PDE PMODE=PORTRAIT,BEGIN=(.10,0),
FONTS=(P07ITA,P08OAA);END;
Example of a PDE that may be compiled by PDL separately from a
JDL. After compilation, a PDE object file is created in the PDE
directory which then may be referenced from within a JDL or by a
DJDE. The name of the object file in the PDE directory is PDE99 (the
same as its identifier on the source command).