Filter
Top Products
PRINT FORMAT COMMANDS
6-62 XEROX DOCUPRINT 180 LPS PDL REFERENCE
DENSITY
This parameter is listed for compatibility purposes only; it is not
supported on the DocuPrint 180 LPS.
Syntax OUTPUT DENSITY =
option(s)
Options Table 6-42 lists the parameter option(s) and definition(s).
Considerations
DESTINATION
This parameter specifies the output destination of paper.
Syntax OUTPUT DESTINATION =
option(s)
Options Table 6-43 lists the parameter option(s) and definition(s).
Table 6-43. DENSITY parameter option(s) and definition(s)
Option(s) Definition(s)
FIX
NOFIX
DEFAULT
The default is DEFAULT.
Table 6-44. Destination parameter option(s) and definition(s)
Option(s) Definition(s)
BIN Specifies that the currently selected bin is used.
The default is BIN.
TRAY Sends output to the sample tray.
Transparencies should always be sent to the sample
tray.
NOTE: Use caution when selecting the TRAY option
because of the sample tray’s limited capacity.
EXPORT Specifies that sheets be sent to the bypass transport.
The EXPORT option takes effect only if the current
operator commands SELECT E or SELECT AUTO
are specified. SELECT AUTO places output
destination under data stream control. SELECT E
causes output to be sent to the bypass transport
option.