Filter
Top Products
PC Cards
PCMCIA PC Cards
190
13383L-004 Rev. A XiIIIPlus/R110Xi/R170Xi User Guide 9/6/07
PCMCIA PC Cards
The printer can use Type I- or Type II-compliant PCMCIA PC cards. These cards may hold
extra memory or font options for the printer, or they may be wireless radio frequency (RF)
cards that allow the printer to communicate over a network (ZebraNet Wireless Print Server
option required).
To install the PCMCIA card, complete these steps:
1. See Figure 46. Remove the card shield from the rear of the printer.
Figure 46 • PCMCIA Card Installation
2. Insert the PCMCIA card into the card slot with the notch up. Insert it far enough to make
the card-eject button pop out.
Caution • Before you insert a PCMCIA card into the printer, discharge any built-up static
electricity by touching the metal printer frame or by using an anti-static wriststrap and mat.
Note • PCMCIA cards are hot-swappable (they can be installed while the printer is on).
1
Screw
2
Card shield
3
PCMCIA card
4
Notch
5
Card-eject button
6
PCMCIA card slot
5
4
3
1
2