Filter
Top Products
205
Specifications
Media Specifications
9/6/07 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-004 Rev. A
Media Specifications
Use the correct size and type of labels for best performance. Refer to the tables that follow for
specifications.
110XiIIIPlus and R110Xi Printers
110
Important • Media registration and minimum label length are affected by label type and
width, ribbon type, print speed, and printer mode of operation. Performance improves as
these factors are optimized. Zebra recommends qualifying any application with thorough
testing.
Media Specifications
110XiIIIPlus/
R110Xi 200 dpi
110XiIIIPlus/
R110Xi 300 dpi
110XiIIIPlus
600 dpi
Minimum label length Tear-Off 0.7 in.* (18 mm*) 0.7 in.* (18 mm*) 0.7 in. (18 mm)
Peel-Off 0.5 in.* (13 mm*) 0.5 in.* (13 mm*) 0.5 in. (13 mm)
Cutter 1.5 in.* (38 mm*) 1.5 in.* (38 mm*) 1.5 in. (38 mm)
Rewind 0.25 in.* (6 mm*) 0.25 in.* (6 mm*) 0.25 in. (6 mm)
RFID labels ** ** N/A
Total media width
(label + backing, if any)
Minimum 0.79 in.* (20 mm*) 0.79 in.* (20 mm*) 0.79 in. (20 mm)
Maximum 4.5 in.* (114 mm*) 4.5 in.* (114 mm*) 4.5 in. (114 mm)
RFID labels ** ** N/A
Total thickness
(includes backing, if any)
0.003 in. (0.076 mm) 0.003 in. (0.076 mm) 0.003 in. (0.076 mm)
0.012 in. (0.305 mm) 0.012 in. (0.305 mm) 0.012 in. (0.305 mm)
Cutter maximum full-width media
thickness
0.009 in. (0.23 mm) 0.009 in. (0.23 mm) 0.009 in. (0.23 mm)
Roll media core inside diameter 3 in. (76 mm) 3 in. (76 mm) 3 in. (76 mm)
Maximum roll diameter on 3 in.
(76 mm) core
8.0 in. (203 mm) 8.0 in. (203 mm) 8.0 in. (203 mm)
Interlabel gap Minimum 0.079 in.* (2 mm*) 0.079 in.* (2 mm*) 0.079 in. (2 mm)
Preferred 0.118 in.* (3 mm*) 0.118 in.* (3 mm*) 0.118 in. (3 mm)
Maximum No more than the
calibrated length of
the label.
No more than the
calibrated length of
the label.
No more than the
calibrated length of
the label.
RFID labels ** ** N/A
Maximum internal fanfold media
pack size (label + backing): L × W×H
8.0×4.5×4.5 in.
(203×114×114 mm)
8.0×4.5×4.5 in.
(203×114×114 mm)
8.0×4.5×4.5 in.
(203×114×114 mm)
Ticket/tag sensing notch: L × W 0.12×0.25 in.
(3×6 mm)
0.12×0.25 in.
(3×6 mm)
0.12×0.25 in.
(3×6 mm)
* Does not apply to RFID labels.
** This parameter varies for each transponder type.