Filter
Top Products
219
Glossary
9/6/07 XiIIIPlus/R110Xi/R170Xi User Guide 13383L-004 Rev. A
label backing (liner) The material on which labels are affixed during manufacture and
which is discarded or recycled by the end-users.
light emitting diode (LED) Indicators of specific printer status conditions. Each LED is
either off, on, or blinking depending on the feature being monitored.
liquid crystal display (LCD) The LCD is a back-lit display that provides the user with
either operating status during normal operation or option menus when configuring the printer
to a specific application.
lock-up This is the term generally used to describe a fault condition that, for no apparent
reason, causes the printer to stop working.
media Material onto which data is printed by the printer. Types of media include: tag stock,
die-cut labels, RFID “smart” labels, continuous labels (with and without media liner), non-
continuous media, fanfold media, and roll media.
media sensor This sensor is located behind the printhead to detect the presence of media
and, for non-continuous media, the position of the web, hole, or notch used to indicate the start
of each label.
media supply hanger The stationary arm that supports the media roll.
non-continuous media Media that contains an indication of where one label/printed
format ends and the next one begins. Examples are die-cut labels, notched tag-stock, and stock
with black mark registration marks.
non-volatile memory Electronic memory that retains data even when the power to the
printer is turned off.
notched media A type of tag stock containing a cutout area that can be sensed as a start-of-
label indicator by the printer. This is typically a heavier, cardboard-like material that is either
cut or torn away from the next tag. (See non-continuous media.)
peel-off A mode of operation in which the printer pauses to allow the user to peel a printed
label away from the backing before another label is printed. Printing pauses until the label is
removed.
print speed The speed at which printing occurs. For thermal transfer printers, this speed is
expressed in terms of ips (inches per second). Zebra offers printers that can print from 1 ips to
12 ips.
printhead wear The degradation of the surface of the printhead and/or the print elements
over time. Heat and abrasion can cause printhead wear. Therefore, to maximize the life of the
printhead, use the lowest print darkness setting (sometimes called burn temperature or head
temperature) and the lowest printhead pressure necessary to produce good print quality. In the
thermal transfer printing method, use ribbon that is as wide or wider than the media to protect
the printhead from the rough media surface.
registration Alignment of printing with respect to the top of a label or tag.