Filter
Top Products
Maintenance
Cleaning The Print Head
102
P1003636-002 TTP 7030™ Technical Manual 10/05/2009
Cleaning The Print Head
The print head can be cleaned without removal.
1. Remove the power from the printer and allow the print head to cool.
2. Tilt the print module backwards.
3. Lift the print head with the print head release lever.
4. Clean the heat elements with a cotton swab immersed in ethyl or isopropyl alcohol.
Caution • Disconnect the printer from the power source before performing the following
procedure.
Note • Zebra recommends using a clean swab dipped in a solution of isopropyl alcohol
(minimum 90%) and deionized water (maximum 10%) to clean the print head.