73
Default Parameter Settings
Serial Interface Set-Up
10/05/2009 TTP 7030™ Technical Manual P1003636-002
Serial Interface Set-Up
Sets the communication speed on the serial interface.
Selects if 7-bit ASCII, or 8-bit, is used on the serial interface.
Select what parity to use on the serial interface.
1
96 Default
Baud Rate
24 Min
11 Max
Note • The new value is not valid until the parameters are stored and the printer restarted.
<ESC>&P<1><24> 2400 bps
<ESC>&P<1><48> 4800 bps
<ESC>&P<1><96> 9600 bps
<ESC>&P<1><19> 19200 bps
<ESC>&P<1><38> 38400 bps
<ESC>&P<1><57> 57600 bps
<ESC>&P<1><11> 115200 bps
Note • If you set an invalid value, the baud rate will return to the previous value.
2
8Default
Data Bits
1
7 Min
8Max
<ESC>&P<2><7> 7-bits (characters 0-127)
<ESC>&P<2><8> 8-bits (characters 0-255)
3
0Default
Parity
1
0 Min
2Max
<ESC>&P<3><0> No parity
<ESC>&P<3><1> Odd parity
<ESC>&P<3><2> Even parity