Operation
Installing a Paper Roll
24
P1003636-002 TTP 7030™ Technical Manual 10/05/2009
Installing a Paper Roll
1. Turn the new paper roll as shown. The paper should be inserted into the printer with the
temperature-sensitive side up.
Figure 9 • Paper Roll Orientation
2. Tear off a full turn of the paper (approximately 0.5 m) from the new paper roll.
Figure 10 • Tear off 0.5 m from the new paper rol
l
3. Make sure the printer is turned ON.
Caution • This is important since the outer end of the paper is usually fixed to the roll with
some type of glue or self-adhesive substance that might otherwise cause paper jam or
even print head damage.